For the loop detector, Dual 12V / 24V available
Specifications
1. Self-calibrating : 1s to 2s
2.Dimension : 79*22.5*90mm ( L*W*H )
3. Work mode can be set by the DIP switch
4.With two relay output
The M1H is a single channel inductive loop detectors. The principle is based on a change in the inductance within the loop which is caused by the metallic components of passing vehicles. The changes are picked up and evaluated by a microprocessor. Ease of use thanks to automatic calibration when the operating voltage is applied.
MAIN FEATURES
1) When the DIP switch is on position or changing the presence output time, Self-detection
would be done ;
2) ABS align to the pillar which can combine with each other compactly ;
3) Presence output time can be adjustable ;
4) Work mode can be set by the DIP switch ;
5) Pulse output or permanent output can be adjustable .
TECHNICAL DATA
1) Power Supply : AC/DC12V (If you need 24V please cantact us first)
2) Power Consumption : 3W maximum
3) Output Relay : 120V/3A AC
4) Work Temperature : -20oC ~ +70oC
5) Loop Inductance Range : 50μH ~ 800μH ( ideal 100μH ~ 300μH )
6) Work Frequency : 20kHz ~ 130kHz
7) Sensitivity : 4 levels adjustable
8) Self-calibrating : 1s to 2s
9) Dimension : 79×22.5×90mm ( L×W×H )
vehicle loop detector installation